AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Antenna tuner3/30/2023 ![]() ![]() Using this device, the following antenna characteristics can be determined: standing wave ratio, resistance, impedance, and net reactance. ![]() ![]() I bought this in 2000 to help with the station antenna tuning and adjusting. Here is a slightly larger view of the MFJ-989C schematic.Ī variety of antennæ can be connected simultaneously, and switch-selected from the front panel.įinally, there is the analyzer. Its components are similar to those of the Signal Corps tuner seen above. When the analyzer is connected to the L-C tuner’s input and the Bird Termaline is connected to the tuner’s output, careful tuning of the tuner results in R = 50 ohms, X = 0 ohms, and SWR = unity regardless of the analyzer’s frequency setting, which comes as no surprise.Ī contemporary antenna tuner with internal instrumentation. Resistance equals 46 ohms, impedance equals 50 ohms, net reactance equals three ohms, and the SWR equals 1.1 to 1. Here is a typical reading with the analyzer connected directly to an actual forty-meter antenna. Schematic diagram of “The Ultimate Transmatch,” designed by Lew McCoy, W1ICP. This unit is probably capable of power levels up to 5,000 watts. These tuners were used by the military during the Second World War. Roller inductor, split-stator input capacitor. Here are examples of how these goals can be accomplished, using either a military surplus L-C tuner or a commercially manufactured unit, along with an antenna analyzer that measures system performance, including load resistance and impedance, the standing wave ratio, and the net reactance at a particular frequency.Ī Bird Termaline dummy load, an MFJ-259B SWR Analyzer,Īnd an L-C tuner built from U.S. Nowadays with solid-state RF amplifiers in many of our contemporary rigs, good engineering practices and efficiency dictate we consider SWR and impedances in particular when it comes to maximum power transfer from the transmitter to the antenna, and minimum reflection from the antenna back to the transmitter. In those days our transmitters were equipped with vacuum tubes, which were relatively forgiving. We hung our antennas, and if they worked, we used them.” There is nothing wrong with that philosophy. We had never heard of standing wave ratios or impedance matching. The Ultimate Transmatch A lifelong friend of mine was fond of saying, “I was first licensed in 1939. ![]()
0 Comments
Read More
Leave a Reply. |